Anybus Wireless Bolt - Ethernet 18-pin

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or Wireless LAN (WiFi).

On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as all TCP and UDP based protocols.


CONFIGURE MACHINES WIRELESSLY

Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI. A machine operator or technician does not need to be physically located at the machine to gain access.

 

an all-in-one solution

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class. Regardless of communication method you select, you have the same connector (2x9p Plug Connector) for both power and communication.
$0.00
    Availability: In stock
    Datasheet Support pages Installation Technical Services

    Features and benefits

    • Configure or troubleshoot industrial machinery over a wireless network
    • Increase flexibility and mobility. Eliminate expensive fixed HMI’s by using a laptop, tablet or smartphone
    • Connect to moving field equipment such as an AGV’s (Automated Guided Vehicles)
    • Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n)
    • Full compatibility with Anybus Wireless Bridge — a wireless product for cable replacement
    • Connect to a Cloud Service of your choice or get live data and integrate it into a SCADA system
    • Supports Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, TCP/UDP
    • Uses Dual-band Wireless LAN 2.4/5 GHz to connect easier and identify interference-free channels
    • All-in-one package: Connector, communication processor and integrated antenna in the same unit
    • Includes a configurable Digital Input to control e.g. roaming behavior.
    • Security features for a secure industrial operation
    • Certified for outdoor usage (UL/Nema 4X).
    • Available with white top Sunbolt enabling 30% higher surrounding temperature compared to black in direct sunlight.
    • Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.
    • Starterkit available

    Wireless LAN Interface

    • Wireless standards: WLAN 802.11 a, b, g, n, d.
    • Operation modes: Access point or Client
    • WiFi channels: 2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan.
    • 5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 100-116 + 132-140 and 120-128 depending on regulatory domain scan. (U-NII-1, U-NII-2, U-NII-2e).
    • RF output power: 18 dBm EIRP (including antenna gain 3dBi)
    • Max number of slaves for access point: 7
    • Power consumption: 54mA@24VDC
    • Net data throughput: 20 Mbps. Link speed: max 65 Mbps (802.11n SISO)
    • Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP including MS-CHAP. 

    Bluetooth Interface

    • Wireless standards (profiles): PANU & NAP
    • Operation modes: Access point or Client
    • RF output power: 14 dBm EIRP (including antenna gain 3dBi)
    • Bluetooth conducted sensitivity: -90 dBm
    • Max number of slaves for access point: 7
    • Power consumption: 36 mA@24VDC
    • Net data throughput: ~1 Mbps
    • Bluetooth version support: Classic Bluetooth v2.1
    • Security: Authentication & Authorization, Encryption & Data Protection,
    • Privacy & Confidentiality, NIST Compliant, FIPS Approved

    Bluetooth Low Energy Interface

    • Wireless standards (profiles): GATT
    • Operation modes: Central or Peripheral (pending)
    • RF output power: 10 dBm EIRP (including antenna gain 3dBi)
    • Max number of simultaneous connections for Central: 7
    • Power consumption: 36 mA@24VDC
    • Net data throughput: ~200 kbps
    • Bluetooth Low Energy version: 4.0 dual-mode 
    • Security: AES-CCM cryptography

    Ethernet Interface

    • Supports all Ethernet protocols using: IP, TCP, UDP, and more.
    • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, and more.
    • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over detection.
    • Layer 2 bridging mode between Anybus Wireless Bolts or Bridges, Otherwise Layer 3 TCP/UDP bridging.

    Digital Interface

    • Digital Input to control e.g. roaming behavior. Max. 3m signal cable.

    Technical specifications

    Dimensions  Diameter: 68 mm. Height: 75 mm (95 mm including connector. Outside height: 41 mm)
    Weight  81g
    Temperature Bolt (black)

    Shadow:  -40 to +65 °C
    Direct sunlight:  -40 to +45 °C
    Storage temperature: -40 to +85 °C
    Temperature Sunbolt (white) Shadow and direct sunlight: -40 to +65 °C
    Storage temperature: -40 to +85 °C
    Output Power 

    Wireless LAN 18 dBm EIRP  - Bluetooth 14 dBm EIRP - Bluetooth Low Energy 10 dBm EIRP
    All including antenna gain 3dBi
    Power supply  9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
    Power consumption
    		 0.7W idle, 1.7W max (54mA@24VDC with Wireless LAN and 36mA@24VDC with Bluetooth)
    Enclosure material Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 476C. Bottom: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.
    Mechanical rating  IP67 for top (outside the host), IP21 for bottom (inside the host)
    Mounting M50 screw and nut (50.5 mm hole needed)
    Max Range   100 meters
    Antenna  One built in antenna 
    Connector Included plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connection)
    Vibration compatibility Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g.
    Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms. 


    CERTIFICATIONS     		 
    Europe ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. CE, 2014/53/EU Radio Equipment Directive (RED) 
    USA  FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also
    Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4.
    UL file: E203225
    Canada ICES-003
    Japan MIC
    Other countries

    Australia, Colombia, Turkey, Malaysia, Argentina
    Pending: Brazil, India, Chile

     

    Ordering information

    Purchasing instructions and terms and conditions: How to buy

    ORDER CODE

    AWB2000 

    		 Wireless Bolt
    Included components

    1x Bolt Ethernet (black top) including 18-pin connector, 1x Installation guide          

    		  
    Optional accessories                     Order Code: 024703
    Cable kit. Molded RJ45 Bolt connector wired with 1.5m Ethernet cable and 24 VDC power supply (world) + Extra Ethernet cable fastening to avoid cable strand breaks.    		                        icon-top-product-bolt-cablekit
     

    Order Code: 024704
    Bolt connector with Ethernet cable (RJ45 female). Total length 20 cm

    		 icon-top-product-bolt-rj45cable
    Guarantee          3 years   

     

    ORDER CODE

    AWB2001

    		 Wireless Bolt
    Included components

    1x Sunbolt Ethernet (white top) including 18-pin connector, 1x Installation guide          

    		  
    Optional accessories                     Order Code: 024703
    Cable kit. Molded RJ45 Bolt connector wired with 1.5m Ethernet cable and 24 VDC power supply (world) + Extra Ethernet cable fastening to avoid cable strand breaks.    		                        icon-top-product-bolt-cablekit
     

    Order Code: 024704
    Bolt connector with Ethernet cable (RJ45 female). Total length 20 cm

    		 icon-top-product-bolt-rj45cable
    Guarantee          3 years   

     

    Get the Wireless Bolt Starterkit

    Order Code

    AWB2300  (BOLT STARTERKIT) 
    Included components

    2x Bolt Ethernet (black top), 2x Worldwide power adapter, 2x Pre-wired cable harness for Power/Ethernet (RJ45), 1x Installation guide

    Bolt-Starterkit
    (Limitation: Max one Starterkit per customer)
    Guarantee          3 years 

     

     

    Related products

    Anybus Wireless Bolt - Ethernet RJ45 PoE

    Anybus Wireless Bridge II - Ethernet

    Anybus Wireless Bridge - Serial - Bluetooth

    sterisafe1CUSTOMER STORY

    INFUSER: Disinfection robot has robust wireless access via Anybus Wireless Bolt

    Anybus Wireless Bolt™ gives the STERISAFE™-Pro disinfection robot wireless access. This enables users to control the robot using a tablet.

     

     

    softtecCUSTOMER STORY

    Softtec: Wireless technology makes life easier in bakery

    Anybus Wireless Bolt enables wireless PROFINET I/O communication over Bluetooth — between a rotating baking machine and the control cabinet.

    Anybus Wireless

    Availability

    ANYBUS WIRELESS BOLT

    How-to videos

    How to mount: Attaching a Wireless Bolt on a machine or cabinet.
    How to configure: Setting up wireless communication between a mobile device and a PLC inside a machine.

    We use cookies on this site to enhance your user experience

    By clicking any link on this page you ar giving your consent for us to set cookies.

    I want to find out more Yes, I agree