Anybus X-gateway – ControlNet Adapter - Modbus RTU Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between ControlNet and Modbus RTU networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Adapter/Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

$0.00

Availability: In stock

Quantity:

Datasheet File download Installation Technical Services

Features and benefits

Fast copying of cyclic I/O data between two networks (10-15 ms)
Proven and tested with all PLC manufacturers
Supports up to a maximum of 512 bytes of Input and Output data in each direction
Optional control and status information added to the I/O data for diagnostic purposes
Robust stand-alone housing for use in harsh industrial environments
Global free technical support and consultancy

ControlNet Adapter features

ControlNet Adapter settings can be made either via on-board switches, or by importing the provided .EDS file into engineering tool of the controlling PLC.

ControlNet CONFORMANCE TESTED™ by ODVA
ControlNet Specification version: Communications Adapter profile 12
Max. 450 bytes of Input and 450 bytes of Output data
ControlNet baudrate 5 Mbit/s
Supports Polled & Bitstrobed, I/O Change-of-state / cyclic I/O
Supports media redundancy
MacID node address setting via DIP switch
Network Access Port (NAP)
ControlNet network configuration via .EDS file
Can be used with RG-6 quad shielded cable
2x BNC network connectors

Modbus RTU Slave interface

Modbus RTU network address settings made via on-board configuration switches

Complete Modbus RTU slave functionality
Max 512 bytes of Input and 512 bytes of Output data
Modbus diagnostics support
Configuration via on-board DIP switches
Modbus RTU baudrate 12-57,6 kbit/s
1x D-sub 9-pin female network connector

Technical specifications

Dimensions (L•W•H)	114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight	400g or 0,880 lbs
Operating temperature	-25 to +65 °C or -13 to +149 °F
Storage temperature	-40 to +85 °C or -40 to +185 °F
Power supply	24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption	max. 400mA (Typical 200mA)
Enclosure material	Aluminium and plastic
Installation position	Vertical / Flat*
Galvanic isolation	YES, on both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard)
I/O configuration	via USB port with Anybus Configuration Manager software
Certifications	CE, _CUL_US, RoHS

Ordering Information

x-gateway-cnts-mbrtu

ORDER CODE: AB7869

INCLUDED COMPONENTS:
- Quick start documentation
- USB configuration cable
- Configuration software available for download
- (Power supply not included)

GUARANTEE: 3 years

For purchasing instructions and terms and conditions, see: How to buy