Anybus CompactCom M40

For both general or demanding high performance applications

The cutting-edge Anybus CompactCom 40-series is based on the award-winning Anybus NP40 network processor. It is especially suitable for both general purpose and for high-end applications with large I/O data transfer, fast network cycles and synchronization demands.

    • Combines major fieldbus networks with high performance real-time Industrial Ethernet
    • Common Ethernet module allows you to download your chosen Ethernet protocol to the module
    • Unique way of handling device profile integration (Drive, Motion, Semi, Others)
    • Safety ready - Can be combined with the IXXAT SafeT100 to provide implementation of safety networks
    • Uses network encryption technologies to keep your devices safe and secure
    • 1st generation CompactCom 30-series available for additional networks 
    Common-Ethernet

    Anybus CompactCom M40 Module - EtherCAT

    The Anybus CompactCom M40 for EtherCAT is a complete communication module which enables your products to communicate on an EtherCAT network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.

    INTERCHANGEABLE WITH OTHER NETWORKS

    By implementing the CompactCom concept into your product line,you will have instant access to any other industrial network by simply plugging in another Anybus module.

    GET REAL-TIME ETHERCAT COMMUNICATION

    The Anybus CompactCom M40 enables fast communication between your device and the EtherCAT network. The module supports generic device profiles and black channel for FSOE implementation. It also comes with a dual port switch implemented in the network processor — the award-winning Anybus NP40.

    With its fast data transfer and very low latency, it's the perfect match for even the most demanding industrial applications.

    $0.00
      Availability: In stock

      Features and benefits

      • A complete, interchangeable communication module with connectors
      • Short in-design with free assistance from HMS ensures a fast time to market
      • ETG pre-certified for network compliance (enables faster network certification)
      • EtherCAT Semiconductor device profile support
      • Fast data transfer: Up to 1486 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
      • Very low latency <15µs.
      • Event-based interface method enables easy access to input and output data at any time
      • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
      • Black channel support enables Functional Safety over EtherCAT (FSOE) implementation
      • IIoT ready: (EoE) Includes Email Client, Web server with customizable content, SSI functionality and FTP server
      • Extended flash-based file system with two-disc access (internal and external)
      • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
      • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.

      EtherCAT Slave interface

      • CANopen over EtherCAT (CoE)
      • Support for Modular Device Profile, DS301 compliant
      • Network Identity customization
      • EMCY support
      • Up to 57343 ADIs can be accessed from the network in generic mode
      • Up to 16383 ADIs can be accessed from the network when modular device profile is enabled
      • Up to 1486 bytes of fast cyclic I/O in each direction
      • Support for Sync0 functionality using distributed clocks
      • Ethernet over EtherCAT (EoE)
      • File access over EtherCAT (FoE)
      • Support for process data remap from the network
      • Black channel for FSOE supported
      • Network cycle time down to 100 μs
      • Possible to implement DS402 drive profiles
      • Semiconductor Device Profile support:  Common Device Profile (ETG.5003.1) and Specific Device Profile (ETG.5003.2xxx)
      • 2x RJ-45 EtherCAT 100 Mbit/s ports available simultaneously

      Transparent Ethernet

      New versions in the Anybus CompactCom 40 Ethernet series gives you complete freedom implementing IT functions in your application

      • Get full control over IT functionality and IT protocols
      • Freedom to create and integrate your own IIoT solutions
      • Separates the real-time protocol data from the other Ethernet data

      Read more

      Technical specifications

      Dimensions  (L•W•H)
      52 x 50 x 22 mm or 2,04 x 1,97 x 0,86"
      51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)
      Operating temperature -40 to +70 °C or -40 to +158 °F
      -40 to +85 °C or -40 to +185 °F (without housing)
      Power requirements 3.3 VDC, +/- 0.15 VDC
      Application Interface
      8/16-bit parallel (30 ns access)
      High speed SPI, baudrate configurable up to 20 MHz
      I/O (shift register interface, cyclical update time 82 μs)
      UART (for backwards compatibility with 30-series, max 625kbps)
      Profile support Generic device
      Ethernet features Transparent socket interface
      Support of HTTP forwarding via socket interface
      Integrated 2-port switch
      IT functions (FTP server, E-mail client, web server with JSON and SSI support)
      Internal file system  Configurable up to 28 MB
      Two discs are available: One internal (28 MB capacity), and one reserved for accessing
      the application file system (capacity determined by application).
      LED indicators Integrated on front (with housing), via application interface (without housing).
      Indicates Module Status and Network Status.
      Connectors 2x RJ45 100 Mbit/s
      Galvanic isolation
      YES
      Mechanical rating IP20, NEMA rating 1
      Mounting PCB mounting via a customized CompactFlash connector available from HMS
      Certifications CE, CULUS, RoHS

      Ordering information

      Purchasing instructions and terms and conditions: How to buy
      All versions available with or without housing. Additional versions for Transparent Ethernet and versions with M12 connectors for IP rating up to IP67. 

      ORDER CODE      AB6607 - M40 EtherCAT Module  abcc-eth-module  
      ORDER CODE   AB6707 - M40 EtherCAT Module Without Housing   CB-B40-ETH  
      ORDER CODE      AB6639 - M40 EtherCAT Module (Transparent Ethernet)  abcc-eth-module  
      ORDER CODE   AB6739 - M40 EtherCAT Module Without Housing (Transparent Ethernet)  CB-B40-ETH  
      ORDER CODE      AB6645 - M40 EtherCAT Module M12  abcc-m12  
      ORDER CODE   AB6745 - M40 EtherCAT Module M12 Without Housing   abcc-m12WH  
      ORDER CODE   SP1137 - CompactCom Host Connector (Optional accessory)  cf-connector