Below you can find all the files and documentation for your specific Anybus X-gateway version.
The chosen interfaces within this Anybus gateway are:
The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and PROFINET-IO networks.
The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on the CANopen network and as an Device on the PROFINET-IO network. The data transmission between the two networks is completely transparent with a maximum data capacity of 512 bytes in each direction.
The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.
Manuals/Design Guides
Certifications
Other files
Software
Configuration Files
Application notes
Solution Sheets
Brochure/Datasheet
Below you can find a link to selection playlist of Anybus X-gateway Configuration Videos hosted on YouTube.
By clicking any link on this page you are giving your consent for us to set cookies.