Below you can find all the files and documentation for your specific Anybus X-gateway version.
The chosen interfaces within this Anybus gateway are:
The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus RTU and POWERLINK networks.
The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave/Device on both networks. The data transmission is completely transparent with a maximum data capacity of 254 bytes in each direction.
The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.
Manuals/Design Guides
Certifications
Other files
Software
Configuration Files
Application notes
Solution Sheets
Brochures/Datasheets
Below you can find a link to selection playlist of Anybus X-gateway Configuration Videos hosted on YouTube.
By clicking any link on this page you are giving your consent for us to set cookies.