Anybus Wireless Bridge II – Ethernet

Anybus® Wireless Bridge enables you create an industrial wireless connection in an industrial Ethernet network. This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and Wireless LAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable. It provides an effective wireless range of up to 400 meters.

BRIDGING TCP/IP ETHERNET

The Wireless Bridge makes it possible to operate leading TCP/IP based industrial Ethernet networks, such as BACnet/IP, PROFINET, EtherNet/IP and Modbus TCP, over Bluetooth and Wireless LAN 2.4 / 5 GHz. 

 

POINT-TO-POINT OR MULTIPOINT

Point-to-point or multipoint Anybus Wireless Bridge is often used as an Ethernet cable replacement (point-to-point communication). But it can also be used as an access point for up to seven Wireless LAN/Bluetooth clients.

$0.00
    Availability: In stock
    Datasheet File download Downloads Technical Services

    Features and benefits

    • Use with point-to-point wireless Industrial Ethernet installations through hazardous or hard-to-reach locations
    • Use as an Access Point for up to seven clients
    • Suitable for AGV’s (Automatic Guided Vehicle)
    • Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n), Robustness (three internal antennas, including MIMO) 
    • Eliminates the need for expensive or maintenance-heavy cabling
    • Bridges TCP/IP Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP and PROFINET
    • Max range of up to 400 meters
    • Full compatibility with Anybus Wireless Bolt — a wireless product for machine mounting
    • Easy setup via push button or web interface
    • Advanced configuration with AT commands
    • Compatible with PROFIsafe requirements
    • Rugged IP65 rated industrial design
    • Security features for a secure industrial operation
    • Three built in antennas for higher performance and better robustness
    • Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.
    • Starterkit available

    Wireless LAN Interface

    • Wireless standards: WLAN 802.11 a, b, g, n, d.
    • Operation modes: Access point or Client
    • WiFi channels: 2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan.
    • 5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 100-116 + 132-140 and 120-128 depending on regulatory domain scan. (U-NII-1, U-NII-2, U-NII-2e).
    • RF output power: 18 dBm EIRP (including max antenna gain 3dBi)
    • Max number of slaves for access point: 7
    • Power consumption: 54mA@24VDC
    • Net data throughput: 20 Mbps. Link speed: max 130 Mbps (802.11n 2x2 MIMO)
    • Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.

    Bluetooth Interface

    • Wireless standards (profiles): PAN (PANU & NAP)
    • Operation modes: Access point or Client
    • RF output power: 14 dBm EIRP (including max antenna gain 3dBi)
    • Max number of slaves for access point: 7
    • Power consumption: 36 mA@24VDC
    • Net data throughput: ~1 Mbps
    • Bluetooth version support: Classic Bluetooth v2.1
    • Security: Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved

    Bluetooth Low Energy 

    • Wireless standards (profiles): GATT
    • Operation modes: Central or Peripheral (pending)
    • RF output power: 10 dBm EIRP (including max antenna gain 3dBi)
    • Max number of simultaneous connections for Central: 7
    • Power consumption: 36 mA@24VDC
    • Net data throughput: ~200 kbps
    • Bluetooth Low Energy version: 4.0 dual-mode
    • Security: AES-CCM cryptography

    Ethernet Interface

    • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support, SNMP user management and access control
    • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
    • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over

    Technical specifications

    Wired interface Ethernet 10/100 Mbit/s
    Dimensions (H•W•D) 93 x 68 x 33mm
    Weight  120g or 0,26 lbs
    Operating temperature -30 to +65 °C or -22 to +149 °F (Storage temp: -40 to +85 °C )
    Power supply  9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
    Power consumption
    		 0.7W idle, 1.7W max
    Enclosure material Plastic PC/ABS (Bayblend FR3010)
    Mechanical rating  IP65
    Mounting Two screws (Ø 4 mm) on flat surface. DIN rail mount option available (optional accessory).
    Max range   400 meters
    Configuration  Three different methods:
    • Accessing the built-in web pages in the product
    • Using Easy Config modes (via push button or inside web interface)
    • Sending AT commands
    Connectors

    1x M12 for Ethernet (4-pin, D-coded)
    1x M12 for Power 5-pin, A-coded)
    RP-SMA antenna connector for external antenna
     Antennas AWB3000
    Three internal antennas: 
    1. 2.4 GHz  
    2. 2,4GHz MIMO
    3. 5GHz


     
    		 AWB3010
    One external antenna:
    1. 2,4/5GHz dual band
    The external antenna does not provide better range, but allows connectivity if the Wireless Bridge
    needs to be placed inside a radio-secure environment such as a steel cabinet. When mounting inside a steel cabinet antenna cables with magnetic foot or screw mount should also be considered.


    CERTIFICATIONS     		 
    Europe ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. 2014/53/EU
    Radio Equipment Directive (RED)
    USA  FCC 47 CFR part 15, subpart B.
    UL: Ind. Cont. Eq. also Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D,T4. UL file: E203225
    Canada ICES 003
    Japan MIC
    Other countries Australia, Colombia, Turkey, Malaysia, Peru, Mexico, Argentina.
    Pending: Brazil, India, Philippines, South Africa, Korea.
       


    WLAN Security  WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.
    Bluetooth Security  Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved

    Ordering information

    Purchasing instructions and terms and conditions:  How to buy

    ORDER CODE

    AWB3000  (WITH INTERNAL ANTENNAS)

    		 wbII-icon

    ORDER CODE

    AWB3010  (WITH EXTERNAL ANTENNA)

    		 wbII-antenna-icon  
    Included components  

    Quick start guide, manuals. (Power supply not included)

    		  
    Optional Accessories

    Order Code: 023040
    Accessory Pack – 1.5 meter Ethernet Cable with RJ45 connector
    and World power supply with 1.5 meter cable and M12 connector.

    		  023040
      Order Code: 024700
    IP67 M12 connector kit for power and Ethernet,
    with screw terminals

    		  024700
      Order Code: 024701
    DIN clip with screws 

    		  024701
      Order Code: 024702
    Replacement external antenna. Foldable, dual band.
    RPSMA connector

    		  024702
      1.04.0085.00000
    Magnetic antenna foot with 1,5 m cable and
    RPSMA connector, excl. antenna.

    		  104008500000
     

    1.04.0085.00003
    Screw-mount antenna base with 1,5 m cable
    and RP-SMA connector, excl. antenna 

    		  104008500003
    Guarantee                3 years   

     

    Get the complete Wireless Cable kit

    - All you need to make your Ethernet cable go wireless!

    ORDER CODE

    AWB3003

    		  
    Included components 2 pcs Anybus Wireless Bridge II (internal antennas)
    2 pcs Ethernet cables 2 meters, M12  + open leads
    2 pcs ”click mount” Ethernet RJ45 connectors
    2 pcs Power cables 2 meters M12 + open leads            		 Anybus Wireless Cable Kit 

     

    Get the Wireless Bridge Starterkit 

    ORDER CODE

    AWB3300

    		  
    Included components Two Wireless Bridges with internal antennas,
    Two Power Supplies (world), cabling, Quick Start Guide

    (Limitation: Max one Starterkit per customer)     		wbII-Starterkit 

    Related products

    Anybus Wireless Bolt - Ethernet 18-pin

    Anybus Wireless Bridge - Serial - Bluetooth

    1080-web-cornerCUSTOMER STORY

    1080 Motion: Anybus wireless technology used for athlete testing

    Anybus Wireless Bridge enables data from 1080 Motion’s neuromuscular testing machines to be transferred wirelessly to a computer for immediate display.

     

     

    Looking for CAN to Bluetooth? Take a look at our IXXAT® CANblue II


    icon-can-topology-2 CANblue II
     Wireless CAN Bridge for Bluetooth - range 200m
     Product details

    Anybus Wireless

    Availability

    ANYBUS WIRELESS BRIDGE

    How-to Videos

    Setting up a Wireless connection in an industrial Ethernet network

    We use cookies on this site to enhance your user experience

    By clicking any link on this page you are giving your consent for us to set cookies.

    I want to find out more Yes, I agree