Industrial wireless access for machines via Bluetooth and WLAN

Give easy and robust industrial wireless access to your industrial cabinets or machines using the Anybus Wireless Bolt.



Anybus® Wireless Bolt™ 


Bring Your Own Device (BYOD) | Easy to Use via Bluetooth or Wireless LAN connection.

The Wireless Bolt is an All in one solution device that's both flexible and mobile. Plug it in and BYOD either via Bluetooth or Wireless LAN (WLAN). If you want to learn more about the Wireless Bolt, check out the video where we talk more about the Bolt and what it's capable of.

0:00 / 0:00

__________ NEW ADDITION TO THE BOLT FAMILY __________


Bolt IoT

The Anybus Wireless Bolt IoT gives devices, machines and equipment Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 with 2G fall back and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost.

The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.

To Bolt IoT Product Page

Bolt Black White 18 pin


Bolt Serial

Anybus Wireless Bolt Serial enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, or WiFi (Wireless LAN). It converts serial RS232/RS485 data to TCP/IP communication over the wireless link. It also works as a router for Modbus-TCP to Modbus-RTU enabling transparent access to all your existing serial Modbus devices.

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an industrial IP66/IP67 protection class.

To Bolt Serial Product Page

Anybus Wireless Bolt

Improve operator safety

A machine operator or technician does not need to be physically located at the machine to gain access. Ideal if space is limited or your unable to open the cabinet doors or improving operator safety in fenced-off areas within a factory.


Configure machines wireless 

Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI.


All-in-one solution

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class.


Improve your outdoor wireless connections with Anybus Sunbolt

Hot conditions like constant exposure to sun can negatively affect the performance and life span of any electronics supplying you with wireless connections. The Anybus Sunbolt absorbs 30% less sunheat than the original black Anybus Bolt making it a perfect fit for outdoor applications. Improve connection performance, extend the life span of the bolt by up to 70% and limit the risk of errors in the electronics for your outdoor applications.




INFUSER: Disinfection robot has robust wireless access via Anybus Wireless Bolt

Robust wireless access needed. Although ozone is a naturally occurring gas, it is harmful at high concentration levels and the STERISAFE™-Pro requires that the operator is outside the sealed room while the robot runs its cycle.

Select your Anybus Wireless Bolt version:

Anybus Wireless Bolt is currently available for Ethernet only. Two versions available, One with an 18-pin push-spring connector and one with an RJ45 connector with PoE option.

2 products
2 products