EtherNet/IP to Serial Linking Device

Connect any RS-232/422/485 serial device to ControlLogix® or CompactLogix® controllers with an EtherNet/IP interface.

The Linking Device performs an intelligent protocol conversion and presents the serial data to the Logix PLC as easily processed I/O data. This offloads your Logix PLC from working with additional calculations.

CONVERT ALMOST ANY TYPE OF SERIAL PROTOCOL

The Linking Device is capable of converting almost any type of serial protocol such as Modbus RTU, DF1, ASCII, or any other type of proprietary; Request/Response or Produce/Consume protocol.

Seamless integration with Studio 5000

With its unique Studio 5000® Logix designer integration, everything is accessible from within Studio 5000, including then serial network configuration. No extra 3rd-party software, licenses or programming required.

Connect, configure, done

EtherNet/IP Linking Devices are configured using a Custom Add On Profile for Studio 5000 Logix Designer. This dynamically generates data structures for each device connected. No ladder logic files (add on instructions) needed.

Furthermore, it also supports automatic generation of named and structured Studio 5000 controller tags, which eliminates the need to create alias tags

$0.00

Availability: In stock

Quantity:

Datasheet File download Installation Technical Services

Features and benefits

Enables the retro-fitting of existing serial RS232/422/485 devices with Logix PLCs with EtherNet/IP
No hardware or software changes, for the connected device
Connects up to 31 serial nodes via RS-485
Up to 500 bytes of Input data and 496 bytes of Output data
Speed up configuration through a seamless integration with Studio 5000 Logix Designer
Compatible with all ControlLogix and CompactLogix PLCs supporting EtherNet/IP
Easy to setup with Custom Add On Profile with no programming required!
Everything configured through Studio5000®, no 3rd party software or licenses needed

Serial protocol configuration features

Selectable RS-232/422/485 interface
Modbus-RTU Master functionality with pre-defined Modbus-RTU configuration wizard
DF1 Master functionality with selectable pre-loaded DF1 commands
Ability to configure ASCII or vendor specific protocols (Request/Response or Produce/Consume via a visual byte-based frame building)
Ability to make popular checksum calaculations
In-built Line Listener to analyze serial telegrams on the sub-network (accessable via Studio5000)

EtherNet/IP interface features

The Linking Device has the very latest ODVA EtherNet/IP adapter functionality

Dual EtherNet/IP ports 10/100Mbit, full or half-duplex operation
Beacon-based DLR (Device Level Ring) and linear network topology supported
Support for multiple (Exclusive Owners) I/O connections (Max 10)
ODVA EtherNet/IP conformance tested

Technical specifications

Dimensions (L•W•H)	120 x 75 x 25mm or 4,72 x 2,95 x 1,06"
Weight	150g, 0,33lb
Operating temperature	0 to +55 °C or 0 to +131 °F
Storage temperature	-40 to +85 °C or -40 to +185 °F
Power supply	24 VDC +/- 10%
Current consumption	max. 300mA (Typical 100mA)
Enclosure material	PC ABS, UL94
Installation position	Vertical
Galvanic isolation	YES, on both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard) or Wall mount
Serial baudrate	1,2-57,6 kbit/s
EtherNet/IP baudrate	10/100 Mbit/s autodetect
EtherNet/IP connector	2x RJ45
EtherNet/IP address	Any valid IP address can be used
TCP/IP settings	Configurable via web-page, configuration tool, DHCP/ARP or via DIP switches
Certifications	ODVA, CE, _CUL_US, ATEX/Haz.Loc

How to configure

Ordering information

Purchasing instructions and terms and conditions: How to buy

Order Code	HMS-EN2SE-R
Included components	HMS-EN2SE-R Linking Device, Installation guide, D-sub connector with screw terminals for sub-network. (Power supply not included)
Optional Accessories	USB-RS-232 configuration adapter (Order Code 019570)
Guarantee	3 years