Configuration procedure

• Download and install the "CHIPtool" configuration software available under "Files and Documentation"
• Scan the Modbus TCP network and configure the IP-settings by if possible, enabling DHCP or set manually.
• Initiate the web interface and then use the Meter and Configuration tabs to complete the setup and map the M-Bus devices to Modbus registers.  

VIDEO: See how to configure M-Bus slave to a Modbus TCP control network

Configure the IP-settings

By installing and running the free software CHIPTool available to download under Files and Documentation, you can then setup the configuration.

• Add the IP address by enabling DHCP or manually add 
• Create a User/Password profile (optional)
• Save the setup
• Access the web interface by right-clicking and selecting HTTP

Edit your configuration

Here you are able to easily define exactly how you wish the M-Bus devices to act on with the Modbus TCP network. 

Edit the Modbus registers

You have a lot of flexibility with the connected M-Bus devices to make changes the the Modbus registers to suit your installation needs.

Auto-detect M-bus devices

By selecting the "Meter" tab in the web interface, this automatically scans the Modbus TCP network and discovers and adds the connected M-Bus devices. Since you can connect 20 or 80 M-Bus devices to one gateway, this eliminates the manual adding of devices and saves the system integrator a lot of time.