Anybus X-gateway - Modbus TCP Client - ControlNet Adapter

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus TCP and ControlNet networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks.This offloads your PLC from working with additional calculations. The gateway acts as an Adapter on the ControlNet network and as a full Master/Client on the Modbus TCP network. The data transmission between the two networks is completely transparent with a maximum I/O data capacity of 256 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

Configuration is made via Ethernet and a built-in web page. The configuration page is used to configure Ethernet TCP/IP settings, Modbus-TCP client/server configuration and I/O data size transfer between Modbus TCP and the chosen network.

$0.00

Availability: In stock

Quantity:

Datasheet File download Installation Technical Services

Modbus TCP Client/Master interface

Modbus TCP Client and Server setup is made via an included visual web configuration interface without the need for any programming.

Modbus TCP Client functionality according to Modbus specification V1.1B
Support for Modbus TCP functions 1, 2, 3, 4, 5, 6, 15, 16, 23
Connects up to 64 Modbus TCP servers/slaves
Supports up to max 256 bytes of Input and 256 bytes of Output data
10/100Mbit operation in full or half-duplex
Integrated FTP server provides easy file management using standard FTP clients
Web server with dynamic data capability and Server Side Include (SSI) capability
Email client with dynamic data capability and Event-triggered email handling
Downlink Live List providing Modbus-TCP transaction status to uplink PLC
Control and Status words for downlink network control/status
Individual Modbus TCP server port number setting
Byte Swap feature
Full Modbus address range (1-65536)
Dual Modbus TCP RJ-45 ports available simultaneously

ControlNet Adapter features

ControlNet Adapter settings can be made either via on-board switches, or by importing the provided .EDS file into engineering tool of the controlling PLC.

ControlNet CONFORMANCE TESTED™ by ODVA
ControlNet Specification version: Communications Adapter profile 12
Max. 450 bytes of Input and 450 bytes of Output data
ControlNet baudrate 5 Mbit/s
Supports Polled & Bitstrobed, I/O Change-of-state / cyclic I/O
Supports media redundancy
MacID node address setting via DIP switch
Network Access Port (NAP)
ControlNet network configuration via .EDS file
Can be used with RG-6 quad shielded cable
2x BNC network connectors

Technical specifications

Dimensions (L•W•H)	110 x 35 x 101 mm or 4,33 x 1,38 x 3,98"
Weight	160g or 0,35 lbs
Operating temperature	-25 to +70 °C or -13 to +158 °F
Storage temperature	-40 to +85 °C or -40 to +185 °F
Power supply	24 VDC
Current consumption	Typical 150mA
USB port	For firmware upgrades
SD memory card slot	For backup, configuration and easy replacement
Modbus TCP connector	2x RJ45
Fieldbus/Ethernet connector	(See the secondary network interface details above)
Galvanic isolation	On both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard) or Wall Mount (optional)
Certifications	CE, _CUL_US, RoHS

Ordering Information

X-gateway-mtcpm-cnts

ORDER CODE: AB9003

INCLUDED COMPONENTS:
- Quick start documentation
- Configuration software available for download
- (Power supply not included)

GUARANTEE: 3 years

For purchasing instructions and terms and conditions, see: How to buy