Anybus X-gateway – PROFIBUS Master - CC-Link Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFIBUS and CC-Link networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Master on the PROFIBUS network and a Slave on the CC-Link network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

$0.00

Availability: In stock

Quantity:

Datasheet File download Downloads Technical Services

Features and benefits

Fast copying of cyclic I/O data between two networks (10-15 ms)
Proven and tested with all PLC manufacturers
Supports up to a maximum of 512 bytes of Input and Output data in each direction
Powerful Master interface for PROFIBUS eliminates the need for a PLC controller
Optional control and status information added to the I/O data for diagnostic purposes
Robust stand-alone housing for use in harsh industrial environments
Global free technical support and consultancy

PROFIBUS Master/Scanner interface

An Anybus X-gateway with an integrated PROFIBUS Master interface can be used when there is no existing PROFIBUS controlling PLC.

Complete Profibus DP Master functionality according to IEC 61158
Controls up to 125 slaves
Optional Live List of the active status of the connected slaves (max 64 slaves)
Maximum 512 bytes of I/O data in each direction
Supports all baudrates up to 12Mbit/s
Supports multiple masters (token passing)
Profibus Master/Slave configuration via the included Anybus Configuration Manager Windows tool via an RS-232 configuration port
1x D-Sub9 Male and 1x D-Sub9 Female connector

CC-Link Slave interface

CC-Link Slave settings can be made either via on-board switches, or by importing the provided .CSP file into engineering tool of the controlling PLC.

Complete CC-Link slave Version 1 and 2 functionality
CC-Link Conformance BAP-05027-B specification
Transparent CC-Link communication (Standard Mode)
PLC Profile compliant communication (PLC profile mode)
Max. 896 bits/128 words (368 bytes) of I/O data in each direction
Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
Up to 4 occupied stations
Up to 8 extension cycles (version 2 only)
CC-Link configuration via on-board switches or via .CSP file
1x 5-pin, 5.08 Phoenix plug network connector

Technical specifications

Dimensions (L•W•H)	114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight	400g or 0,880 lbs
Operating temperature	-25 to +65 °C or -13 to +149 °F
Storage temperature	-40 to +85 °C or -40 to +185 °F
Power supply	24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption	max. 400mA (Typical 200mA)
Enclosure material	Aluminium and plastic
Installation position	Vertical / Flat*
Galvanic isolation	YES, on both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard)
I/O configuration	via USB port with Anybus Configuration Manager software
Certifications	CE, _CUL_US, RoHS

Ordering Information

x-gateway-ccls-pdpm

ORDER CODE: AB7810

INCLUDED COMPONENTS:
- Quick start documentation
- USB configuration cable
- Configuration software available for download
- (Power supply not included)

GUARANTEE: 3 years

For purchasing instructions and terms and conditions, see: How to buy