Anybus X-gateway – Lonworks Slave - Modbus Plus Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Lonworks and Modbus Plus networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as an Slave on both networks. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

$0.00
    Availability: In stock
    Datasheet File download Downloads Technical Services

    Features and benefits

    • Fast copying of cyclic I/O data between two networks (10-15 ms)
    • Proven and tested with all PLC manufacturers
    • Supports up to a maximum of 512 bytes of Input and Output data in each direction
    • Optional control and status information added to the I/O data for diagnostic purposes
    • Robust stand-alone housing for use in harsh industrial environments
    • Global free technical support and consultancy

    Lonworks Slave interface

    Lonworks network variables and configuration is made via an included configuration tool

    • Certified for Lonmark application layer guidelines V3.2
    • Lonworks network variables and configuration of the gateway is made via the included configuration tool (network commissioning requires 3rd part tools)
    • Lonworks FT-X1 Transceiver
    • Up to 256 input + 256 output LonWorks Network Variables / Modbus Word Registers
    • Support for up to 15 nodes
    • Amount and type of network variables configurable, data linking between Lonworks variables (SNVT's) and Modbus Registers
    • Lonworks baudrate 78 kbit/s
    • 1x D-sub 9-pin male RS-232 configuration port 
    • 1x 5-pin, 5.08 Phoenix network connector

    Modbus Plus Slave Interface 

    Modbus Plus address settings made via on-board DIP switches

    • Complete Modbus Plus slave functionality
    • Up to 32 words of global (cyclic I/O) data in each direction
    • Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
    • Point-to-point parameter data (up to 125 words)
    • Onboard Node ID and Source ID switches
    • Modbus Plus baudrate 1 Mbit/s
    • 1x D-sub 9-pin female network connector

    Technical specifications

    Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight 400g or 0,880 lbs
    Operating temperature -25 to +65 °C  or  -13 to +149 °F 
    Storage temperature -40 to +85 °C  or  -40 to +185 °F 
    Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
    Current consumption     max. 400mA (Typical 200mA)
    Enclosure material  Aluminium and plastic
    Installation position Vertical / Flat*
    Galvanic isolation YES, on both BUS/Ethernet side
    Mechanical rating IP20, NEMA rating 1
    Mounting DIN-rail (EN 50022 standard)
    I/O configuration via USB port with Anybus Configuration Manager software
    Certifications CE, CULUS, RoHS

    Ordering Information

    x-gateway-lons-mbps

    ORDER CODE: AB7625

    INCLUDED COMPONENTS:
    - Quick start documentation
    - USB configuration cable
    - Configuration software available for download
    - (Power supply not included)

    GUARANTEE:  3 years

    For purchasing instructions and terms and conditions, see: How to buy

    Related products

    More information

    Learn more about the Anybus X-gateway

    Configuration

    See how to configure the X-gateway

    extend-x-gateway

    X-gateway assistance

    Through HMS Technical Services, start-up assistance, on-site help and trainings are available.
      

    You can also have our team create your configuration.
    Read more

    We use cookies on this site to enhance your user experience

    By clicking any link on this page you ar giving your consent for us to set cookies.

    I want to find out more Yes, I agree