Anybus X-gateway – DeviceNet Scanner - EtherNet/IP Adapter (CIP Routing)

The Anybus X-gateway makes it possible to transfer data between a DeviceNet network up to a Ethernet network which can be Modbus TCP/ EtherNet/IP or HTTP. This gateway version has additional support for CIP message routing between EtherNet/IP and DeviceNet.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Scanner on DeviceNet network and an Adapter on the EtherNet/IP network.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

This Anybus X-gateway version has its owns Configuration Tool allows you to configure the parameters associated with the Ethernet and DeviceNet network interfaces. The included BWConfig is a Microsoft Windows application that communicates with the X-gateway over a standard RS-232 serial link using the PC serial port or USB serial adapter.

$0.00

Availability: In stock

Quantity:

Datasheet File download Downloads Technical Services

Features and benefits

Fast copying of cyclic I/O data between the two networks
Powerful Scanner interface eliminates the need for a PLC controller on the DeviceNet network
Connects information or control level networks to device level networks for programming, configuration, control or data collection. (E.g. Modbus TCP to DeviceNet)
Provides CIP Router/Bridge functionality to connect EtherNet/IP to DeviceNet
Included IT functions - WEB-server, E-mail client, FTP-server, Telnet
Robust stand-alone housing for use in harsh industrial environments
Global free technical support and consultancy

DeviceNet Scanner/Master features

An Anybus X-gateway with an integrated DeviceNet Scanner interface can be used when there is no existing DeviceNet controlling PLC.

DeviceNet CONFORMANCE TESTED™ by ODVA
DeviceNetNet Specification version: Communications Adapter profile 12
Supports up to 63 DeviceNet Adapter/Slaves
Max. 512 bytes of Input and 512 bytes of Output data
DeviceNet baudrate 125, 250, 500 kbit/s
Supports I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
MacID node address setting via DIP switches

EtherNet/IP Adapter/Slave interface

EtherNet/IP adapter settings can be made either via the built-in web interface, or by importing the provided .EDS file into engineering tool of the controlling PLC.

EtherNet/IP CONFORMANCE TESTED™ by ODVA
EtherNet/IP Level 2 I/O Server CIP
CIP message routing between Ethernet/IP and DeviceNet
10/100Mbit operation in full or half-duplex
Max. 512 bytes Input and 512 bytes Output data
Integrated FTP server provides easy file management using standard FTP clients.
Web server with dynamic data capability and Server Side Include (SSI) capability
Email client with dynamic data capability and Event-triggered email handling
TCP/IP settings via DHCP/ARP/Anybus IPconfig (HICP)

Technical specifications

Dimensions (L•W•D)	126 x 110 x 42mm or 4,96 x 4,33 x 1,65"
Weight	500g or 1,10 lbs
Operating temperature	0 to +65 °C or +32 to +147 °F
Power supply	24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption	max. 300mA
Enclosure material	Aluminium
Installation position	Vertical
Galvanic isolation	YES, on both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard)
Configuration	via 9-pin DSUB RS-232 port with the included BWConfig Windows software
Certifications	CE, _CUL_US,ATEX

Ordering Information

ORDER CODE: AB7607

INCLUDED COMPONENTS:
- Quick start documentation
- Anybus netTool-DN
- DeviceNet Software
- Configuration software available for download
- (Power supply not included)

GUARANTEE: 3 years

For purchasing instructions and terms and conditions, see: How to buy