Anybus X-gateway – DeviceNet Scanner - DeviceNet Adapter

The Anybus X-gateway allows you to seamlessly inter-connect/extend PLC control systems and their connected devices on a DeviceNet network.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two PLC systems. The gateway acts as a Scanner on one side of DeviceNet network and as an Adapter on the other side. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

$0.00

Availability: In stock

Quantity:

Datasheet File download Downloads Technical Services

Features and benefits

Fast copying of cyclic I/O data between the two DeviceNet networks (10-15 ms)
Proven and tested with all PLC manufacturers
Supports up to a maximum of 512 bytes of Input and Output data in each direction
Powerful Scanner interface for DeviceNet eliminates the need for a PLC controller
Optional control and status information added to the I/O data for diagnostic purposes
Robust stand-alone housing for use in harsh industrial environments
Global free technical support and consultancy

DeviceNet Scanner/Master features

An Anybus X-gateway with an integrated DeviceNet Scanner interface can be used when there is no existing DeviceNet controlling PLC.

DeviceNet CONFORMANCE TESTED™ by ODVA
DeviceNetNet Specification version: Communications Adapter profile 12
Supports up to 63 DeviceNet Adapter/Slaves
Max. 512 bytes of Input and 512 bytes of Output data
Optional Live List of the active status of the connected adapters
DeviceNet baudrate 125, 250, 500 kbit/s
Supports I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
MacID node address setting via DIP switches
DeviceNet Scanner/Adapter network configuration via in-built web interface or RSLogix/Studio5000 software
1x 5-pin, 5.08 Phoenix plug connector

DeviceNet Adapter features

DeviceNet Adapter settings can be made either via on-board switches, or by importing the provided .EDS file into engineering tool of the controlling PLC.

DeviceNet CONFORMANCE TESTED™ by ODVA
DeviceNetNet Specification version: Communications Adapter profile 12
Max. 512 bytes of Input and 512 bytes of Output data
DeviceNet baudrate 125, 250, 500 kbit/s
Supports I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
MacID node address setting via DIP switch
DeviceNet network configuration via .EDS file
1x 5-pin, 5.08 Phoenix plug connector

Technical specifications

Dimensions (L•W•H)	114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight	400g or 0,880 lbs
Operating temperature	-25 to +65 °C or -13 to +149 °F
Storage temperature	-40 to +85 °C or -40 to +185 °F
Power supply	24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption	max. 400mA (Typical 200mA)
Enclosure material	Aluminium and plastic
Installation position	Vertical / Flat*
Galvanic isolation	YES, on both BUS/Ethernet side
Mechanical rating	IP20, NEMA rating 1
Mounting	DIN-rail (EN 50022 standard)
I/O configuration	via USB port with Anybus Configuration Manager software
Certifications	CE, _CUL_US, RoHS

Ordering Information

x-gateway-devm-devs

ORDER CODE: AB7811

INCLUDED COMPONENTS:
- Quick start documentation
- USB configuration cable
- Configuration software available for download
- (Power supply not included)

GUARANTEE: 3 years

For purchasing instructions and terms and conditions, see: How to buy