Anybus X-gateway - AS-Interface Master - PROFINET-IRT Device

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and PROFINET-IRT networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Master on AS-Interface network and a slave/device on the PROFINET-IRT network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

$0.00
    Availability: In stock
    Datasheet File download Downloads Technical Services

    Features and benefits

    • Fast copying of cyclic I/O data between the two networks (10-15 ms)
    • Proven and tested with all PLC manufacturers
    • Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
    • Supports up to a maximum of 512 bytes of Input and Output data in each direction
    • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
    • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
    • Optional control status information added to I/O data for diagnostic purposes
    • Robust stand-alone housing for use in harsh industrial environments
    • Global free technical support and consultancy

    AS-Interface Master Interface

    An Anybus X-gateway with an integrated AS-Interface M4 Master interface can be used when there is no existing AS-Interface controlling PLC.

    • Complies to AS-Interface 3.0 specification
    • Controls up to 62 AS-Interface slaves
    • Optional Live List of the active status of the connected slaves
    • Supports Combined Transaction Types 1, 2, 3, 4 and 51
    • Up to 248 digital inputs and 186 digital outputs
    • Up to 124 (16-bit) analog values
    • AS-Interface baudrate 167 kbit/s
    • Synchronous I/O (optional)
    • On-board configuration button
    • 1x D-sub 9-pin male connector (RS-232) for terminal-based monitoring and configuration
    • 2x 2-pin 5,08 Phoenix plug connectors

    PROFINET IRT Device/Slave interface 

    PROFINET IRT Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC. 

    • Complete PROFINET RT and IRT functionality specification 2.3
    • Conformance tested supporting Class A, B and C
    • Max 512 bytes of Input and 512 bytes of Output data
    • Baud rate 10/100 Mbit/s Isochronous cycle times 0.25 to 4 ms (25 Us increments)
    • SNMP-MIBII support
    • TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
    • LLDP (Linked Layer Discovery Protocol)
    • Support for I&M (Identification & Maintenance)
    • PROFINET uplink configuration via .GSDML file
    • Dual port cut-through switch
    • Dual RJ-45 ports available simultaneously

    • PROFINET Asset Management

       

    TECHNICAL SPECIFICATIONS

    Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight 400g or 0,880 lbs
    Operating temperature -25 to +65 °C  or  -13 to +149 °F 
    Storage temperature -40 to +85 °C  or  -40 to +185 °F 
    Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
    Current consumption     max. 400mA (Typical 200mA)
    Enclosure material  Aluminium and plastic
    Installation position Vertical / Flat*
    Galvanic isolation YES, on both BUS/Ethernet side
    Mechanical rating IP20, NEMA rating 1
    Mounting DIN-rail (EN 50022 standard)
    I/O configuration via USB port with Anybus Configuration Manager software
    Certifications CE, CULUS, RoHS

    Ordering Information

    x-gateway-asi-prts

    ORDER CODE: AB7502

    INCLUDED COMPONENTS:
    - Quick start documentation
    - USB configuration cable
    - Configuration software available for download
    - Anybus OPC server software available for download
    - (Power supply not included)

    GUARANTEE:  3 years

    For purchasing instructions and terms and conditions, see: How to buy

    Related products

    More information

    Learn more about the Anybus X-gateway

    Configuration

    See how to configure the X-gateway

    extend-x-gateway

    X-gateway assistance

    Through HMS Technical Services, start-up assistance, on-site help and trainings are available.
      

    You can also have our team create your configuration.
    Read more

    We use cookies on this site to enhance your user experience

    By clicking any link on this page you are giving your consent for us to set cookies.

    I want to find out more Yes, I agree