Anybus CompactCom B40

For both general or demanding high performance applications

The cutting-edge Anybus CompactCom 40-series is based on the award-winning Anybus NP40 network processor. It is especially suitable for both general purpose and for high-end applications with large I/O data transfer, fast network cycles and synchronization demands.

    • Combines major fieldbus networks with high performance real-time Industrial Ethernet
    • Common Ethernet brick allows you to download your chosen Ethernet protocol to the module
    • Fast data transfer: up to 1500 bytes of process data each way (latency 15µs)
    • Unique way of handling device profile integration (Drive, Motion, Semi, Others)
    • Safety-ready. Combine with the IXXAT SafeT100 for safety network integration
    • Uses network encryption technologies to keep your devices safe and secure
    Anybus-CompactCom-B40-Brick

    Anybus CompactCom B40 Brick - PROFIBUS

    The Anybus CompactCom B40 for PROFIBUS is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFIBUS network.

    ADD YOUR OWN CONNECTORS AND PERIPHERALS

    The B40 Brick gives you the flexibility to add your own connectors and network isolation. An alternative is to use the ready-made connector board from HMS. The B40 Brick is ideal for device manufacturers who are looking for a semi-integrated solution where connector flexibility, size and cost are key elements.

    ONE IN-DESIGN – ACCESS ALL NETWORKS

    By implementing the B40 Brick into your product line, by simply switching to another brick and connector board, you can get connected to other B40 supported networks.

    PROVEN AND TRUSTED

    The B40 PROFIBUS Brick handles data lengths up to 488 bytes (244 bytes input and 244 output) and supports both PROFIBUS DP-V0 and DP-V1 according to IEC61158 type 3. The PROFIBUS network implementation is made directly into the CompactCom network processor — the award-winning Anybus NP40. With its fast data transfer and very low latency, it's the perfect match for even the most demanding industrial applications.

    $0.00
      Availability: In stock

      Features and benefits

      • A ready-made PROFIBUS connectivity solution
      • Flexibility to add your own connectors and peripherals to limit size and costs
      • Easy mounting to your host PCB design
      • Short in-design with free assistance from HMS ensures a fast time to market
      • PNO pre-certified for network compliance (enables faster network certification)
      • Fast data transfer: Up to 244 bytes of I/O data in each direction
      • Very low process data latency
      • Event-based interface method enables easy access to input and output data at any time
      • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
      • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.

      PROFIBUS Slave interface

      • Supports PROFIBUS DPV1 functionality
      •  Automatic baud rate detection
      • Generic and PROFIBUS specific diagnostic support
      • User Parameterization Data support
      • Set Slave Address support
      • ADI access via DP-V1 read/write services
      • Max 244 bytes Input and 244 bytes Output data
      • Device identity customization
      • Generic GSD file provided
      • Support for Modular Device Mode

      Technical specifications

      Dimensions  (L•W•H)
      36 x 36 x 8 mm or 1,41 x 1,41 x 0,31"
       
      Operating temperature -40 to +85 °C  or  -40 to +185 °F  
      Power requirements 3.3 VDC, +/- 0.15 VDC
       
      Application Interface
      8/16-bit parallel (30 ns access)
      High speed SPI, baudrate configurable up to 20 MHz
      I/O (shift register interface, cyclical update time 82 μs)
      UART (for backwards compatibility with 30-series, max 625kbps)
       
      Profile support Generic device  
      LED indicators Available via host connector - Indicates Module Status and Network Status.  
      Connectors No: Add your own connectors (D-sub, 5.08, M12) - YES: via B40 connector board  
      Galvanic isolation
      No: Add your own isolation - YES: via B40 connector board
       
      Mechanical rating IP20, NEMA rating 1  
      Mounting PCB fastening via B40 connector boards available from HMS  
      Certifications CE, CULUS, RoHS  

      Ordering information

      Purchasing instructions and terms and conditions:  How to buy

      ORDER CODE       AB6670 - B40 PROFIBUS Brick                     abcc-b40
      ORDER CODE   AB6663 - B40 Connector Board for PROFIBUS (Optional accessory)  CB-B40-PDP