The Anybus Modbus to KNX gateway allows Modbus slave devices to communicate on a KNX network. The gateway works as a translator between the two networks allowing both Modbus RTU and Modbus TCP signals to be read and controlled from any KNX TP1 network. This enables central control and supervision of Modbus devices from a KNX system in a building.
The gateway enables central control and supervision of Modbus devices in KNX networks within Building Automation and HVAC industry (Heating, Ventilation and Air Conditioning). Thanks to the variable number of supported datapoints ranging from 100 to 3,000 signals, this gateway covers all applications from small installations up to very large networks.
With the Anybus Configuration Manager MAPS tool you can easily configure and commission the gateway. It can also be used for signal processing (e.g. transform a Modbus temperature signal in degrees Celsius into a KNX signal in degrees Fahrenheit), datalogging over USB and troubleshooting. With the integrated signal viewer you can see at any time all the KNX and Modbus values, and force a change if wanted. Configuration data, e.g. a list of Modbus registers, can be automatically imported from Excel.
On the KNX side, the gateway simulates a KNX device and acts as if it was another device in the KNX system
The gateway functions as a serial Modbus RTU master to Modbus slave devices connected via RS232 and/or RS485 serial ports of the gateway, and as a Modbus TCP client to the devices connected as Modbus TCP servers. A mix of both Modbus serial and Modbus TCP devices can be connected at the same time.
Purchasing instructions and terms and conditions: How to buy
Installation sheet and USB cable (Power supply not included)
Anybus Factory to Building gateway
お問い合わせ
製品のご購入について
販売代理店リスト
お問い合わせフォーム
当社は、ウェブサイトにおける皆様のユーザーエクスペリエンス向上のためにクッキー（Cookie）を使用しています。
この先、ウェブサイトの閲覧を継続することにより、クッキーの使用に同意されたものとみなします。