• English
  • Deutsch
  • français
  • 中文
  • 日本語
Choisir une langue
HMS
Menu
  • Aperçu
  • Produits
  • Applications
  • Technologies
  • Support
  • Services tech.
  • Contacts
  • HMS
Anybus
  • Page d'accueil/
  • Produits/
  • Aperçu des passerelles/
  • Passerelles spécifiques/
  • Anybus M-Bus to Modbus TCP gateway/
  • M-Bus - Modbus Configuartion

The easy way to configure M-Bus slaves to a Modbus TCP control network!

The Anybus M-Bus to Modbus TCP Gateway is normally configured via the included web interface, which gives access to all gateway parameters, meter configuration and services. The gateway can also be configured by uploading configuration files directly to the gateway via FTP.

M-Bus to Modbus Gateway

Configuration procedure

  • Download and install the "CHIPtool" configuration software available under "Files and Documentation"
  • Scan the Modbus TCP network and configure the IP-settings by if possible, enabling DHCP or set manually.
  • Initiate the web interface and then use the Meter and Configuration tabs to complete the setup and map the M-Bus devices to Modbus registers.  
HMS Academy - How to configure
VIDEO: See how to configure M-Bus slave to a Modbus TCP control network

Configure the IP-settings

By installing and running the free software CHIPTool available to download under Files and Documentation, you can then setup the configuration.

  • Add the IP address by enabling DHCP or manually add 
  • Create a User/Password profile (optional)
  • Save the setup
  • Access the web interface by right-clicking and selecting HTTP
CHIPTool configuration software

Edit your configuration

Here you are able to easily define exactly how you wish the M-Bus devices to act on with the Modbus TCP network. 

Check your configuration

Edit the Modbus registers

You have a lot of flexibility with the connected M-Bus devices to make changes the the Modbus registers to suit your installation needs.

Edit the Modbus registers

Auto-detect M-bus devices

By selecting the "Meter" tab in the web interface, this automatically scans the Modbus TCP network and discovers and adds the connected M-Bus devices. Since you can connect 20 or 80 M-Bus devices to one gateway, this eliminates the manual adding of devices and saves the system integrator a lot of time.

See all connected M-Bus devices

Availability

  • Anybus M-Bus to Modbus gateway

More information

Learn more about the Anybus M-Bus to Modbus TCP gateway

  • M-Bus - Modbus Configuartion

Add to your installation

Connect M-Bus sensors to PROFINET/TIA Portal


X-gateway-mtcpm-pnts
You can also connect your M-Bus devices to any other industrial network by pairing the M-Bus gateway with an Anybus X-gateway for Modbus-TCP.

How-to video: M-Bus to PROFINET

Applications

Appareils
Fabricants d’automates
Secteurs industriels

Technologie

Bus de Terrain/Série
Ethernet Industriel
Sans Fil/Autres

Produits

Produits embarqués
Passerelles
Sans fil

Support

Par produit
Support en ligne

Contact

Acheter
Restez connecté
Partenaires de systèmes

About HMS

Évènements

Partager Commenter Visionner Mettre en relation Infolettre
NOS MARQUES: Anybus Ixxat Ewon Intesis
HMS
Copyright © 2020 HMS Industrial Networks.
Menu
  • Cookies
  • Politique de confidentialité
  • Conditions d'utilisation
  • Partner login

Ce site utilise des cookies pour améliorer votre expérience utilisateur

En utilisant notre site web, vous acceptez l’utilisation des cookies.

En savoir plus Oui, j’accepte