Anybus X-gateway – DeviceNet Scanner - EtherCAT Slave

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between DeviceNet and EtherCAT networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Scanner on the DeviceNet network and a Slave on the EtherCAT network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

x-gateway-devm-ects

Features and benefits

  • Fast copying of cyclic I/O data between DeviceNet and EtherCAT networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Scanner interface for DeviceNet eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

DeviceNet Scanner/Master features

An Anybus X-gateway with an integrated DeviceNet Scanner interface can be used when there is no existing DeviceNet controlling PLC.

  • DeviceNet CONFORMANCE TESTED™ by ODVA
  • DeviceNetNet Specification version: Communications Adapter profile 12
  • Supports up to 63 DeviceNet Adapter/Slaves
  • Max. 512 bytes of Input and 512 bytes of Output data
  • Optional Live List of the active status of the connected adapters
  • DeviceNet baudrate 125, 250, 500 kbit/s
  • Supports I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
  • MacID node address setting via DIP switches
  • DeviceNet Scanner/Adapter network configuration via in-built web interface or RSLogix/Studio5000 software 
  • 1x 5-pin, 5.08 Phoenix plug connector
AB7697

EtherCAT Slave interface

EtherCAT Slave settings can be made by importing the provided .XML file into engineering tool of the controlling PLC.

  • Complete EtherCAT slave according to DS 301 V4.022
  • Supports CANopen over EtherCAT
  • Max 512 bytes of Input and 512 bytes of Output data (PDO + SDO)
  • Baudrate 100 Mbit/s full duplex
  • 4 FMMU channels (can be used freely by the EtherCAT master for any purpose.)
  • 4 SM channels
  • Bit-oriented FMMU operation
  • Position addressing, node addressing and logical addressing
  • PDI Watchdog
  • Output I/O Sync Manager Watchdog
  • Integrated switch allowing for a daisy-chain topology
  • 2x RJ45 EtherCAT connectors

Technical specifications

Dimensions(L•W•H) 114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight 400g or 0,880 lbs
Operating temperature -25 to +65 °Cor-13 to +149 °F
Storage temperature -40 to +85 °Cor-40 to +185 °F
Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Current consumption max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation position Vertical / Flat*
Galvanic isolation YES, on both BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
Mounting DIN-rail (EN 50022 standard)
I/O configuration via USB port withAnybus Configuration Manager software
Certifications CE,CULUS,RoHS

Ordering Information

x-gateway-devm-ects

NUMÉRO D’ARTICLE: AB7697

ÉTENDUE DE LA LIVRAISON:
- Instructions de démarrage rapide
- Câble de configuration USB
- Logiciel de configuration disponible par téléchargement
-(Alimentation non incluse)

GARANTIE:  3 ans

Pour les instructions d’achat et les termes et conditions, voir: Comment acheter

    Related products

Ce que vous pouvez faire !

Connectez deux réseaux industriels - Fieldbus ou Ethernet industriel - via MQTT ou OPC UA.

Échange de données

En savoir plus sur comment la passerelle X-Gateway échange les données d'E/S.

Assistance X-Gateway

Via les services techniques de HMS, assistance au démarrage, aide sur site et cours de formation sont disponibles.

Anybus X-Gateway: Rapports des utilisateurs

Découvrez dans nos rapports d'utilisateurs la versatilité de nos passerelles X.