Connectivity solutions for your Siemens applications 

 

Anybus® offers solutions for device manufacturers, machine builders and system integrators with connectivity to and from Siemens equipment and networks.

Quick Find solutions for:  PROFINET    PROFIBUS

siemens

PROFINETConnectivity Solutions

Connect to other PLC networks

Anybus® X-gateways™ interconnect Siemens PLC systems using PROFINET with almost any other PLC fieldbus/Ethernet network.
gateway-rj45
  • Extend a production line - add new equipment on the same or other network
  • Retro-fit devices on older fieldbus networks to PROFINET - Keep existing I/O modules and wiring 
Anybus X-gateway

Connect serial or CAN-based devices to PROFINET

Anybus® Communicator™ is a stand-alone protocol converter enabling you to connect your non-networked serial RS-232/422/485 or CAN-based device to PROFINET. 

communicator-can
  • No hardware or software modifications for your device required!
  • Easy configuration with NO programming required!
Anybus Communicator

Wireless access for PROFINET-based machines and equipment

Anybus® Wireless Bridge™ and Wireless Bolt™ allows you bridge PROFINET over Bluetooth or WLAN or give wireless machine access, for enabling mobile maintenance.

Wireless
  • Bridge PROFINET equipment over WLAN or Bluetooth
  • Gain wireless access to a machine for configuration and maintenance
See the Anybus Wireless Solutions

Connect a IT/OT system with an Anybus IIoT gateway

Anybus® .NET to PROFINET gateway enables factory-floor machine data from Siemens PLC's with PROFINET to .NET applications.

it-ot-profinet
  • Send and receive data from each side
  • Machine / PLC programmer is in full control
  • Significantly reduced integration complexity
Anybus .NET to PROFINET

Integrate PROFINET-IRT connectivity into your industrial devices

Anybus® CompactCom™  gives your industrial device Real-Time/High Performance, PROFINET-IRT network capability in either Chip, Brick or Module form factors

compactcom-profinet
  • For general purpose and for high-end PROFINET-IRT applications
  • PNO pre-certified supportings features such as Fast Start Up, PROFIenergy
Anybus CompactCom

Test your PROFINET device connectivity without a PLC

PROFINET Master Simulator is an easy to use tool to test the PROFINET Device functionality of any industrial device.

mastersim--pnt
  • Easy to use test and diagnostic tool for PROFINET Devices
  • Read/Write of cyclic I/O data and acyclic parameter data in various formats
PROFINET Master Simulator

PROFIBUSConnectivity Solutions

Connect to other PLC networks

Anybus® X-gateways™ interconnect Siemens PLC systems using PROFIBUS with almost any other PLC fieldbus/Ethernet network.
gateway-rj45
  • Extend a production line - add new equipment on the same or other network
  • Versions available with PROFIBUS Master and Slave interfaces 
Anybus X-gateway

Connect serial or CAN-based devices to PROFIBUS

Anybus® Communicator™ is a stand-alone protocol converter enabling you to connect your non-networked serial RS-232/422/485 or CAN-based device to PROFIBUS. 

communicator-can
  • No hardware or software modifications for your device required!
  • Easy configuration with NO programming required!
Anybus Communicator

Connect a IT/OT system with an IIoT gateway

Anybus® .NET to PROFIBUS gateway enables factory-floor machine data from Siemens PLC's with PROFIBUS to .NET applications.

it-ot-profibus
  • Send and receive data from each side
  • Machine / PLC programmer is in full control
  • Significantly reduced integration complexity
Anybus .NET to PROFIBUS

Integrate PROFIBUS connectivity into your industrial devices

Anybus® CompactCom™  gives your industrial device a High Performance, PROFIBUS slave network capability in either Chip, Brick or Module form factors

compactcom-profibus
  • For general purpose and for high-end PROFIBUS applications
  • Provides PROFIBUS Slave functionality and is PNO pre-certified
Anybus CompactCom

Test your PROFIBUS device connectivity without a PLC

Anybus® PROFIBUS Master Simulator is an easy to use tool to test the PROFIBUS Slave functionality of any fieldbus device.

mastersim--pdp
  • Easy to use test and diagnostic tool for PROFIBUS slaves
  • Read/Write of cyclic I/O data and DPV1 parameter data in various formats
PROFIBUS Master Simulator

Applications

Case Studies

See how Anybus products help solve connectivity issues to and from Siemens networks and systems.

londonelectronics

Anybus Communicator allows London Electronics to effortlessly connect the serial based displays to a PROFIBUS PLC network.

Read more

spami

Anybus X-gateway allows PROFIBUS-based cameras on a Siemens PLC systems to connect to an Ethernet PLC control system within a Visual Inspection System from SPAMI.

Read more

icsa

Anybus CompactCom provides IMPSA wind turbines with a fast PROFINET solution with the only solution available with fast variable updating speed.

Read more

Fortress Interlocks

Anybus CompactCom together with the IXXAT Safe T100 are used to give safety interlock systems from Fortress Interlocks an easy PROFIsafe integration.

Read more

Ce site utilise des cookies pour améliorer votre expérience utilisateur

En utilisant notre site web, vous acceptez l’utilisation des cookies.

En savoir plus Oui, j’accepte