Multi-network communication for Commercial Vehicles and Mining

Special-purpose vehicles, like excavators, farm machinery or non-road mobile machinery usually have sensors and actuators which need to be connected to control units (ECUs or HMI).

To do this manufacturers rely on fieldbus or industrial Ethernet protocols. HMS products not only solve the communication issues on up-and-running systems in the field, they are also used in test benches for testing components and systems.

Anybus products for Mining and Heavy-Duty Vehicles

Anybus Communicator

Connect non-networked machines and vehicles to SAE J1939

Anybus Communicator enables communication between serial or CAN-based devices and SAE J1939 or other networks.

No hardware or software changes required for the machine
Supports RS232/422/485 and CAN
Configuration tool — no programming

Anybus Communicator

Anybus Wireless

Interconnect machines and equipment on different communication standards

Anybus X-gateways act as translators between different fieldbus and industrial Ethernet protocols and network standards.

More than 250 network combinations supported
Compatible with all leading PLCs
Easy configuration, no programming!

Anybus X-gateways

Wireless and Embedded solutions

Wireless

Anybus Wireless Solutions
Use Bluetooth or WLAN to replace industrial Ethernet cables or give wireless machine access, for enabling mobile maintenance.

Bridge Industrial Ethernet equipment over WLAN or Bluetooth
Gain wireless access to a machine for configuration and maintenance

compactcom-profinet

Anybus CompactCom
Anybus CompactCom enables fast and cost-effective implementation of a network interface into your device – perfectly adapted to your machine or device, as a chip, brick or module.