+1 312 829 0601
Anybus M-Bus to Modbus-TCP gateway
All case studies
Processcomponent: M-Bus sensors connected in 10 minutes!
Processcomponent in Sweden uses the Anybus M-Bus to Modbus-TCP gateway to quickly connect M-Bus sensors to the OptoEMU Energy Monitoring System. This provides building owners with real-time data from their buildings so they can do monitoring, logging and invoicing.
What I really like about the Anybus M-Bus gateway is that it is very easy to use and quick to install. Before, it could take several hours to configure a single meter running M-Bus. With the Anybus gateway we can set things up in 10 minutes!
Read the full case study (PDF)
Swedish Processcomponent AB has installed a monitoring system in an apartment building in Gothenburg. The system gathers data from 72 apartments, a grocery store, and the central HVAC system. All around the building, there are sensors for temperature, energy and water. The problem was that the sensors communicate via M-Bus and the energy monitoring system — the OptoEMU from Opto22— uses Modbus-TCP.
To solve this communication issue, Processcomponent found the Anybus M-Bus to Modbus gateway from HMS Industrial Networks. The gateway decodes M-Bus telegrams and maps them directly to Modbus registers. This way, the sensors can be understood by the OptoEMU and their values show up directly.
Copyright © 2001-2016 HMS Industrial Networks.
All rights reserved.