Modbus RTU - Open Master / Slave application protocol

Connect any device or network to Modbus RTU

With Anybus connectivity solutions, you can:


Connect an industrial device with a proprietary protocol to Modbus RTU

Connect Modbus RTU to any other industrial network

Provide your devices with integrated Modbus RTU connectivity through an Anybus Chip, Brick or Module solution

 

PROFIBUS installation
Connect. Configure. Done!

What is Modbus RTU?
Modbus-RTU (Remote Terminal Unit) means that the Modbus protocol is used on top of a serial line with an RS-232, RS-485 or similar physical interface. Numerous automation systems have Modbus-RTU interfaces for communication. Modbus devices are certified by the Modbus User Organization for interoperability and conformance to the Modbus specification. Learn more about Modbus RTU
  •  How to connect to Modbus RTU

  With Anybus you have several ways of connecting to or integrating Modbus RTU

Connect any device to Modbus RTU
PROFIBUS CommunicatorAnybus Communicator is a stand-alone protocol converter enabling you to connect your device to Modbus RTU.

It doesn't matter if your device runs CAN, RS232/422/485, Modbus RTU, DF1 or any other proprietary protocol.

You configure the connection in a configuration manager software which means no programming is needed.
Anybus Communicator Serial Modbus RTU Master to Fieldbus/Ethernet
Anybus Communicator Serial Modbus RTU Master to serial Modbus RTU Slave (Specific version)
Anybus Communicator Serial Modbus RTU Slave to CAN based protocols (Specific version)
Connect other Industrial Network and PLC systems to Modbus RTU
PROFIBUS X-gatewayAnybus X-gateway works as a translator between Modbus RTU and any other industrial network (PROFIBUS, PROFINET, EtherNet/IP, Modbus TCP, CANopen etc.).

You configure the communication in the Anybus Configuration Manager which comes with the product.
Anybus X-gateway Modbus RTU Slave to other networks
Anybus X-gateway Modbus RTU Slave to Modbus TCP Master (Specific version)
Anybus X-gateway Modbus RTU Slave to CANopen Master (Specific version)
Anybus X-gateway Modbus RTU Master to Modbus TCP Slave (Transparent)
Integrate Modbus RTU connectivity into your industrial devices
Embed Anybus CompactCom technology in Chip, Brick or Module formats and provide your devices with Modbus RTU and all other industrial networks with just one in-design development.

CompactCom is designed for integration into industrial automation devices providing slave/adapter capabilities. No matter which CompactCom series or solution format you choose, you have the full Anybus interchangeability in terms of software and hardware, limiting your development efforts to an absolute minimum.
Modbus RTU Module
Integrate a CompactCom module for a complete solution with fastest time to market and the absolute minimum of development efforts!
Modbus RTU Brick interface
Integrate a CompactCom Brick interface, a complete interface the gives you connector flexibility. Add your own choice of connectors. ( D-sub, M12, Other)
Modbus RTU Chip solution
Integrate Modbus RTU and any other network directy to your PCB design with an Anybus NP40 or NP30 CHIP solution!