AS-Interface Master
- EtherCAT Slave
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows.The AS-Interface Master for the Anybus X-gateway implements an extended AS-Interface master (M4), and complies to version 3.0 of the AS-I Complete Specification.It supports up to 62 slaves with a maximum of 248 digital input and 186 output signals. It also supports 124 analog values. All standard services are available including detailed diagnostics....
Read
more here!
| Files for Anybus X-gateway - AS-Interface Master - EtherCAT Slave |
 |
|
|
|
|
CE D.o.C. and ATEX certificates |
- |
274,70 kb
|
 |
|
|
Manual Addendum AS-Interface Master |
2.13 |
479,51 kb
|
|
|
|
Manual Gateway generic |
1.12 |
867,32 kb
|
|
|
|
Installation Sheet AS-Interface Master |
1.11 |
368,09 kb
|
|
|
|
Installation Sheet Gateway generic |
1.00 |
760,88 kb
|
|
|
DXF and Pdf CAD drawings of Anybus X-gateway |
1.00 |
60,91 kb
|
|
|
|
Manual Addendum EtherCAT slave |
1.02 |
527,94 kb
|
|
|
|
Installation Sheet EtherCAT slave |
1.00 |
248,31 kb
|
|
|
|
How to configure an Anybus EtherCAT slave module with a Beckhoff PLC |
1.04 |
1 093,02 kb
|
|
|
|
How to configure an Anybus AS-Interface Master module |
1.02 |
840,06 kb
|
|
|
|
XML-files for EtherCAT |
- |
7,01 kb
|
|
|
|
Conformance Certificate EtherCAT |
2 |
187,07 kb
|
|
|
|
Request Information