Product Support - Anybus-S

 EtherCAT Interface

The Anybus-S EtherCAT module incorporates a powerful EtherCAT Slave interface providing instant connectivity to the EtherCAT network.The 100 Mbit/s EtherCAT interface uses 2 standard RJ45 connectors. It supports a simple low cost line structure, a tree structure, daisy chaining or drop lines - no expensive infrastructure components are required. The EtherCAT protocol is based on the standard IEEE 802.3 layers according to ISO/OSI. The module physical layer is 100BASE-X. The communication profile is the CANOpen adapter device profile using SDO´s and PDO´s for data communication.The Dual-Port RAM based hardware and software interface for the Ethercat module is standardised and identi...

 Read more here!


 General Files and Documentation for the Anybus-S
 File Name  Version
Size (KB) 
ZIP File Anybus-S Sample code German - 60,56 kb
ZIP File Anybus-S Sample code English - 29,63 kb
PDF Document Anybus General Design Guide 2.07 1 485,00 kb
PDF Document Fieldbus Conformance help document 2.01 260,46 kb
PDF Document Anybus-S Slave Shortform Aug 2009 991,62 kb
 

 Specific Files and Documentation for EtherCAT Interface
 File Name  Version
Size (KB) 
 Technical Documents
PDF Document ABS EtherCAT Appendix, for version 1.xx 1.0 437,93 kb
PDF Document ABS EtherCAT Appendix, for version 2.xx 1.03 1 116,75 kb
 Configuration Files
ZIP File Configuration files 2.1 3,42 kb
 Application Files
ZIP File How to configure an Anybus EtherCAT slave module with a Beckhoff PLC 1.04 1 093,02 kb
 Certificates
PDF Document Fieldbus Certificate, for version 2.xx - 187,07 kb
PDF Document CE - Declaration of Conformity - 84,34 kb
 Other
PDF Document Material Composition Declaration - 325,97 kb