Connects serial or CAN based devices to Fieldbus & Ethernet        
Anybus Communicator™ - Device to Network Gateways
Get your industrial devices network enabled, quickly and easily with the Anybus Communicator family. Easy setup, no programming required.

Connects non-networked devices via a serial RS232/422/485 cable
Supports Modbus RTU, DF1, ASCII and proprietary serial and CAN based protocols
Connects devices to all major fieldbus and industrial Ethernet networks

Anybus Communicator
Anybus Communicator
  Connect almost any two industrial networks or PLC systems         
Anybus X-gateway™ - Network to Network Gateways
With over 200 different network combinations to choose from, connecting almost any 2 industrial networks or PLC systems. Easy setup, no programming required.

Connects between open standard Fieldbus and Industrial Ethernet networks
Master and Slave combinations available
Ideal for factory retro-fits and upgrades

Anybus X-gateway
Anybus X-gateway

  Wireless Bridges, Access Points and Serial-Port Adapters          
Anybus Wireless BridgesAnybus Wireless Bridge

Wireless bridging of BACnet/IP, EtherNet/IP, Modbus-TCP, Profinet
Bluetooth and WiFi 2.4 / 5 GHz versions (dual-band support)
Easy push button configuration

Anybus Wireless Bridge

  Gateways for Building Automation and energy metering               
Anybus BACnet to Modbus Gateway Anybus M-Bus to Modbus-TCP Gateway
Modbus RTU/ TCP) to BACnet/IP
Up to 30 modbus serial devices
in-built webserver

Anybus BACnet-Modbus
M-Bus Master to MBTCP Server
Decodes M-Bus telegrames
Map meter values to Modbus registers

Anybus M-Bus to Modbus TCP

  Modbus gateway, Serial Server and Master Simulators                         
Anybus Modbus RTU to TCP gateway Anybus Serial Server
Modbus gateway Modbus-RTU to TCP server
Connects up to 32 RTU slaves
Support for RS232 and RS485

Anybus Modbus gateway
Anybus Serial Server Create up to 16 virtual COM ports
Connect via LAN or WAN
RS232 and RS485 interface

Anybus Serial Server

Master Simulators Anybus OPC Server
Turns your PC to Fieldbus Master
For Profibus, DeviceNet or CANopen
Test and evaulation your network

Master Simulators
Supports any OPC application
OPC Data Access (DA) v1.0, 2.05, 3.0
Free of charge

Anybus OPC Server

  CANopen solutions for Siemens               
1SI CANopen - for SIMATIC ET200S CM CANopen - for SIMATIC S7-1200
1SI CANopen module Plug-in Master/Slave module
For use with SIMATIC ET200S
Configuation manager included

1 SI CANopen Module

CM CANopen Plug-in Master/Slave module
For use with SIMATIC S7-1200 PLC
Configuation software included

CM CANopen